HISHI PLASTICS USA INC.

Specifications

Premium Quality PVC Heat Shrinkable Insulating Tubing
(Click here to download printable specs)

SIZE RANGES SHRINK RATIO
LFW Thickness
13.5mm - 203            x 0.05 Machine Direction (length) 10% ± 5%
13.5mm - 203            x 0.07 Transverse Direction (width) 5% ± 5%

STANDARD ROLL LENGTHS PHYSICAL PROPERTIES
Thickness (mm) Length Item Data Test References
0.05 500 meters Tensile Strength 400 kgs/sq.cm JISC2132
0.07 500 meters   39 MPA and up  
    Tear Strength 75 kgs/cm JISK-6781
      735N/cm and up  

STANDARD TOLERANCES CALCULATING SHRINK RATIO
Lay Flat Width
Range (mm)
Tolerance (mm) Machine Direction Shrinkage:
13.5 - 72    +1, -0 Length (mm) before shrink - length (mm) after shrink x 100
72.5 - 89 +1.5, -0 Length (mm) before shrink  
90 - 99    +2, -0    
99.5 - 129.5    +3, -0 Transverse Direction Shrinkage:  
130 and up    +5, -0 Width (mm) before shrink - Width (mm) after shrink x 100
    Width (mm) before shrink;  
       
Thickness (mm) Tolerance (mm) COLORS  
0.05 ± .025 Standard: Clear, White and Black  
0.07 ± .020 (Custom colors available upon request)  
       
CUT LENGTH AND PERFORATION TOLERANCS BANDING MACHINE APPLICATION
Cut Lengths: ± 1mm Hishi Tube can be formulated to run on any banding machine
Perforation Position: ± 2mm with assurances of maintaining tolerances for machine speeds in excess of 300 bpm. Please discuss your machine's requirements with your Hishi representative and decide which of the formulations are best for you.

Condenser Grade: Capacitor Insulating PVC Sleeving (UL VW-1 flammability rated)
(Click here to download printable specs)

SIZE RANGES SHRINK RATIO
LFW Thickness
13.5mm - 203 x
0.05
Machine Direction (length) 5% or 10% ± 5%
13.5mm - 203 x
0.07
Transverse Direction (width) 45% or 50% ± 5%
21mm - 220 x
0.15
     
41mm - 203 x
0.20
     
55mm - 130 x
0.30
     

STANDARD ROLL LENGTHS PHYSICAL PROPERTIES
Thickness (mm) Length Item Data Test References
0.05 400 meters Tensile Strength 400 kgs/sq.cm JISC2132
0.10 300 meters   39 Mpa and up  
0.15 200 meters Tear Strength 75 kgs/cm JISK-6781
0.20 200 meters   735N/cm and up  
0.30 100 meters Volume Resistivity 10(14) ohm-cm and up  
    Dielectric Breakdown Levels 0.07mm 5 kv and up  
      0.10mm 6kv and up  
      0.15mm/0.20mm 12kv and up  
      0.30mm 15kv and up  

TOLERANCES Heat Resistance / Operating Temperature
Lay Flat Width
Range (mm)
Tolerance (mm)

Successive use up to 100 C +/- 2C at 1,000 hours is possible without cracking. Certain conditions must prevail, especially the need to have a smooth, burr-free surfface. Customer should perform testing if they wish to exceed the results found by our own testing.

 

 

13.5 - 72    +1, -0
72.5 - 89 +1.5, -0
90 - 99    +2, -0
99.5 - 129.5    +3, -0
130 and up    +5, -0
     
Thickness (mm) Tolerance (mm) COLORS
0.05 ± .025 Standard: Clear, White and Black
0.07 ± .020 (Custom colors available upon request)
0.10 ± .020  
0.15 ± .040 UL Recognized Component
0.20 ± .040 UL 224 VW-1 Rated I.D. # E101994 (m)
0.30 ± .050 More details available upon request

Battery Grade: Battery Insulating PVC Sleeving
(Click here to download printable specs)

SIZE RANGES SHRINK RATIO
LFW Thickness All Sizes BLF 1045 or
13.5mm - 203        x 0.07   BLF 1050 or  
13.5mm - 203        x 0.10   BLF 1550  
21mm - 203           x 0.15 Machine Direction (length) 10% ± 5%
41mm - 203           x 0.20 Transverse Direction (width) 5% ± 5%
55mm - 130           x 0.30      

STANDARD ROLL LENGTHS PHYSICAL PROPERTIES
Thickness (mm) Length Item Data Test References
0.05 500 meters Tensile Strength 400 kgs/sq.cm 39 MPA and up JISC2132
0.07 500 meters      
0.10 300 meters Tear Strength 75 kgs/cm 735N/cm and up JISK-6781
0.15 200 meters      
0.20 200 meters Volume Resistivity 10(14) ohm-cm and up  
0.30 100 meters Dielectric 0.07mm 5kv and up  
    Breakdown 0.1mm 6kv and up  
    Level 0.15mm/0.2mm 12kv and up  
      0.3 mm 15kv and up  

STANDARD TOLERANCES Heat Resistance / Operating Temerature
Lay Flat Width Range (mm) Tolerance (mm) Successive use up to 100 C +/- 2 C at 1,000 hours is possible without cracking. Certain conditions must prevail, especially the need to have a smooth, burr-free surface. Customer should perform testing if they wish to exceed the results found by our own testing.
13.5 - 72    +1, -0
72.5 - 89 +1.5, -0
90 - 99    +2, -0
99.5 - 129.5    +3, -0
130 - 200    +5, -0 Colors
    Standard: Clear, White and Black (Others available upon request)
       
Thickness (mm) Tolerance (mm) UL Recognized Component
0.05 ± .02 UL 224 VW-1 Rated I.D. #E101994 (m)
0.07 ± .02 More details available on request  
0.10 ± .02    
0.15 ± .04    
0.20 ± .04    
0.30 ± .05    

PET Grade: Environmentally friendly shrinkband
(Click here to download printable specs)

SIZE RANGES SHRINK RATIO
LFW Thickness
13.5mm - 203            x 0.05 Machine Direction (length) 10% ± 5%
13.5mm - 203            x 0.07 Transverse Direction (width) 50% ± 5%

STANDARD ROLL LENGTHS PHYSICAL PROPERTIES
Thickness (mm) Length Item Data Test References
0.05 500 meters Tensile Strength 400 kgs/sq.cm JISC2132
0.07 500 meters   39 Mpa and up  
custom lengths available
Tear Strength 75 kgs/cm JISK-6781
      735N/cm and up  

STANDARD TOLERANCES CALCULATING SHRINK RATIO
Lay Flat Width
Range (mm)
Tolerance (mm) Machine Direction Shrinkage:
35 - 80    +1, -0 Length (mm) before shrink - length (mm) after shrink x 100
    Length (mm) before shrink  
81 - 130    +2, -0    
    Transverse Direction Shrinkage:  
    Width (mm) before shrink - Width (mm) after shrink x 100
    Width (mm) before shrink;  
       
Thickness (mm) Tolerance (mm) COLORS  
0.05 ± .025 Standard: Clear  
0.07 ± .020 (Custom colors available upon request)  
       
CUT LENGTH AND PERFORATION TOLERANCS BANDING MACHINE APPLICATION
Cut Lengths: ± 1mm Hishi Tube can be formulated to run on any banding machine with assurances of maintaining tolerances for machine speeds in excess of 300 bpm. Please discuss your machine's requirements with your Hishi representative and decide which of the formulations are best for you.
Perforation Position: ± 2mm

General Purpose: High Quality Heat Shrinkable Tubing
(Click here to download printable specs)

SIZE RANGES SHRINK RATIO
LFW Thickness
13.5mm - 203 x
0.05
Machine Direction (length) 5% or 10% ± 5%
13.5mm - 203 x
0.07
Transverse Direction (width) 45% or 50% ± 5%
21mm - 220 x
0.15
     
41mm - 203 x
0.20
     
55mm - 130 x
0.30
     

STANDARD ROLL LENGTHS PHYSICAL PROPERTIES
Thickness (mm) Length Item Data Test References
0.05 400 meters Tensile Strength 400 kgs/sq.cm JISC2132
0.10 300 meters   39 Mpa and up  
0.15 200 meters Tear Strength 75 kgs/cm JISK-6781
0.20 200 meters   735N/cm and up  
0.30 100 meters Volume Resistivity 10(14) ohm-cm and up  
    Dielectric Breakdown Levels 0.07mm 5 kv and up  
      0.10mm 6kv and up  
      0.15mm/0.20mm 12kv and up  
      0.30mm 15kv and up  

TOLERANCES Heat Resistance / Operating Temperature
Lay Flat Width
Range (mm)
Tolerance (mm)

Successive use up to 100 C +/- 2C at 1,000 hours is possible without cracking. Certain conditions must prevail, especially the need to have a smooth, burr-free surfface. Customer should perform testing if they wish to exceed the results found by our own testing.

 

 

13.5 - 72    +1, -0
72.5 - 89 +1.5, -0
90 - 99    +2, -0
99.5 - 129.5    +3, -0
130 and up    +5, -0
     
Thickness (mm) Tolerance (mm) COLORS
0.05 ± .025 Standard: Clear, White and Black
0.07 ± .020 (Custom colors available upon request)
0.10 ± .020  
0.15 ± .040 UL Recognized Component
0.20 ± .040 UL 224 VW-1 Rated I.D. # E101994 (m)
0.30 ± .050 More details available upon request